Eskay Creek Phase 1 Infill Drilling
22 Zone Highlights:
- 17 g/t Au, 234 g/t Ag (5.29 g/t AuEq) over 56.34 m (SK-20-379)
- 10 g/t Au, 183 g/t Ag (4.55 g/t AuEq) over 52.03 m (SK-20-383)
- 71 g/t Au, 127 g/t Ag (3.41 g/t AuEq) over 55.34 m (SK-20-382)
- 98 g/t Au, 73 g/t Ag (3.95 g/t AuEq) over 25.18 m (SK-20-378)
- 04 g/t Au, 93 g/t Ag (3.28 g/t AuEq) over 46.56 m (SK-20-375)
21C Zone Highlights:
- 51 g/t Au, 644 g/t Ag (18.10 g/t AuEq) over 10.24 m (SK-20-334)
- 68 g/t Au, 595 g/t Ag (10.61 g/t AuEq) over 11.50 m (SK-20-357)
- 24 g/t Au, 726 g/t Ag (30.92 g/t AuEq) over 7.43 m (SK-20-366)
Gold Equivalent (AuEq) calculated via the formula: Au (g/t) + [Ag (g/t) / 75]. True widths range from 70-100% of reported core lengths for the 21A and 21C Zones Apparent widths are reported for the 22 Zone due to the geometry of the mineralization and the orientation of the drill holes. Length weighted AuEq composites are constrained by geological considerations. Grade-capping of individual assays has not been applied to the Au and Ag assays informing the length-weighted AuEq composites. Metallurgical processing recoveries have not been applied to the AuEq calculation and are taken at 100%. Samples below detection limit were nulled to a value of zero.
22 Zone Phase I Infill Continues to Confirm Modelled Mineralization
Drilling within the 22 Zone continues to yield exceptionally thick, high-grade results highlighted by 2.17 g/t Au, 234 g/t Ag (5.29 g/t AuEq) over 56.34 m (SK-20-379, apparent width) in the core of the 22 Zone, which is corroborated by up-dip intersections of 1.71 g/t Au, 127 g/t Ag (3.41 g/t AuEq) over 55.34 m and 2.10 g/t Au, 183 g/t Ag (4.55 g/t AuEq) over 52.03 m (SK-20-382 and SK-20-383, respectively, apparent widths). For comparison, this portion of the resource was informed by a historical intersection of 2.69 g/t AuEq over 47.50 m (C04-1259). The recent results confirm the reported average AuEq and Au grades of Indicated and Inferred pit constrained resources in the 22 Zone found in the Company’s 2019 Mineral Resource Estimate (“MRE”) at 3.0 g/t AuEq and 2.1 g/t AuEq, respectively. However, the recently intersected Ag grades are substantially higher.
The 22 Zone is discordant mineralization hosted within the footwall rhyolite, which is intensely altered to silica-sericite. The 22 Zone is interpreted to have developed along a sub-vertical structural conduit that crosscuts the rhyolite and fed the overlying exhalative mineralization found in the Contact Mudstones. Mineralization within the 22 Zone is vertically dipping, averages 70 m true horizontal width and has been defined by drilling over a strike length of 320 m.
21A and 21C Infill Drilling Continues to Corroborate Projected Mineralization
In addition to the results from the 22 Zone, the recently completed Phase 1 portion of the infill drilling campaign within the 21A and 21C Zones confirms the grade and spatial predictability of the Company’s 2019 MRE, which was largely informed by historical drilling results.
The Company is currently drilling the Phase 2 program at Eskay Creek with eleven drill rigs and is on schedule to complete the program in December 2020. One drill rig is performing a 5,000 m resource expansion program at the Snip Project. At present, 81 drill holes are awaiting analytical results.
Skeena Resources Limited is a junior mining company focused on developing the past-producing Eskay Creek gold-silver mine located in Tahltan Territory in the Golden Triangle of northwest British Columbia, Canada. The Company released a robust Preliminary Economic Assessment in late 2019 and is currently focused on infill and exploration drilling at Eskay Creek to advance the project to Pre-Feasibility. Skeena is also exploring the past-producing Snip gold mine.
On behalf of the Board of Directors of Skeena Resources Limited,
Walter Coles Jr.
President & CEO
Exploration activities at the Eskay Creek Project are administered on site by the Company’s Exploration Managers, Raegan Markel, P.Geo. and Adrian Newton, P.Geo. In accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration and Resource Development, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting the exploration activities on its projects.
Quality Assurance – Quality Control
Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged. The remaining drill core is subsequently securely stored on site. Numbered security tags are applied to lab shipments for chain of custody requirements. The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company’s Qualified Person, Paul Geddes, P.Geo, Vice President Exploration and Resource Development.
Drill core samples are submitted to ALS Geochemistry’s analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 1 kg is pulverized. Analysis for gold is by 50 g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 50 g fire assay fusion with gravimetric finish. Analysis for silver is by 50 g fire assay fusion with gravimetric finish with a lower limit of 5ppm and upper limit of 10,000 ppm. Samples with silver assays greater than 10,000 ppm are re-analyzed using a gravimetric silver concentrate method. A selected number of samples are also analyzed using a 48 multi-element geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and also for mercury using an aqua regia digest with Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) finish. Samples with sulfur reporting greater than 10% from the multi-element analysis are re-analyzed for total sulfur by Leco furnace and infrared spectroscopy.
Cautionary note regarding forward-looking statements
Certain statements made and information contained herein may constitute “forward looking information” and “forward looking statements” within the meaning of applicable Canadian and United States securities legislation. These statements and information are based on facts currently available to the Company and there is no assurance that actual results will meet management’s expectations. Forward-looking statements and information may be identified by such terms as “anticipates”, “believes”, “targets”, “estimates”, “plans”, “expects”, “may”, “will”, “could” or “would”. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the estimation of mineral resources and reserves, the realization of resource and reserve estimates, metal prices, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes and other matters. While the Company considers its assumptions to be reasonable as of the date hereof, forward-looking statements and information are not guarantees of future performance and readers should not place undue importance on such statements as actual events and results may differ materially from those described herein. The Company does not undertake to update any forward-looking statements or information except as may be required by applicable securities laws.
Neither the Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.
Swiss Resource Capital AG
Telefon: +41 (71) 354-8501
Telefax: +41 (71) 560-4271
Telefon: +41 (71) 3548501